Garrett Turbo

Kenneth S asked:


ive been looking for a replacement turbo for my sisters car for a long time. i want to replace it because it leaks really bad. she goes through a quart of oil about once a month. the car still runs surprisingly but i don’t want her driving it like that. i want to say those b230f engines run between 14-17 psi of boost. the engine is a 2.3L L4 engine. those engines run really well when they work correctly. ive been looking at the garrett turbo’s. what would be a good turbo to install that would give it a little more kick. ide like to see around 240+ hp. it was stock at 165hp and 195 torque. boost kicked in around 2000 rpm. has anyone done this before. im lost when it comes to picking a turbo.

Create a video blog

cripticslate asked:


I took out a garrett turbo from a saab and was wondering if it will fit in my prelude. its a bc1. also in the front looks fine but the back is a spinning fan looking thing, it doesnt have the housing around the fan…does it need that to be mounted?

Kansieo.com

EL Mariachi asked:


I am so ready and set on installing a full turbo system in my car, but what is required after the installment, so no engine damage will be done. I have heard of things like reprograming my mother board and tune-up? What else is needed?

For side information: I have a
Chevy Cobalt LS 2.2
Manual
Going to install a Garrett alpha turbo kit

garrett turbo

Geovanni asked:


i just have the
Compressor Inlet and Compressor Discharge
the inlet has a A/R .50 and it says Garrett as for the turbo maker
but thats all i know about it….. it has M.24 idk what that is then on the Discharge it has 0.86 then T790
it aslo has a little tag that says GL D237J followed by 14411-29D00 and under that 471024-9………….if you know anything let me know im trying to find out what car this turbo fits in and how much these 2 parts r worth or how much i should sell them for
aholes i came on here so you guys can give me the answers bcus i obviously cant find them therefore you guys can look for them

Caffeinated Content

Cory H asked:


Around a week ago I sold a Garrett turbo online to a guy around 2500 miles away. When I sent it there were no bent fins the shaft play was normal and had no problems with it. Well he gave me less than a day to ship it before he filed a claim on paypal which he finally took it off after he recieved the turbo. Then now he says it has bent fins and that there is a small shaft play and when I showed him that it was normal he started talking about all the other things were wrong. Now he wants me to either pay for a rebuild kit or a refund and once i told him im not paying for a rebuild kit he wants his refund and honestly I don’t have the money for the refund and honeslty i think he just wants his money back and keep my turbo and once i tell him he won’t be getting a refund he will file another claim in which paypal will probably see it his way. what would you do.
Yea i have pictures of it and from what I can tell no bent fins or nothing. First he started out shaft play then he said bent fins now he saying that someone also took the turbo apart and that he wants a full refund.

Caffeinated Content

aaron b asked:


I have a 99 GST Spyder, want to do some mod’s for more power, not necessarily “trick it out”. I am looking at a Garrett T28 turbo kit and a HKS BOV for about a $1000. Any better suggestions or ideas? Appreciate the help all!

Kansieo.com

SKA=<3 asked:


I’m looking at the jgs ka24e starter kit but I heard their turbos are not that good. So would a garrett t3/t4 turbo fit their manifolds? And well all their other parts?

Also buying the turbo seprately could be cheaper.
Are all t3/t04e turbos the same just different trims and ar? Also is the trim the size of the housing and the exaust intake at just the housing .

Sorry I’m tired so I don’t really know what I’m talking about so if there a stupid question in there I’m sorry

Website content

Drew asked:


I have a 05 RSX type s. I want to turbo it with. Garrett 35r turbo
I’m looking for at least 415whp 300torque. Keep the motor stock? Or what should I do?

Caffeinated Content

Jamie asked:


Might be a long shot but no harm in asking. Does anyone have a link to a good wallpaper of a turbocharger (car engine)?

Really really want this but too small.

http://82.234.166.107/site-ford-rs/Page%20RS%20Cosworth/Dessin%20technique%20Sierra%20cosworth/GARRETT-TURBO.jpg

Tried photoshopping but as it expands, the quality goes down.

I want one like that where it shows the gasses.

Thanks in advance.

Caffeinated Content

andy asked:


today i got a garrett t3 turbo (i believe) out of a saab 900. how can i make this fit my 95 camaro 3.4?

Caffeinated Content